Advances in Engineering Innovation

Advances in Engineering Innovation

Vol. 9, 10 July 2024


Open Access | Article

Design and engineering application of 35kV floating photovoltaic power station

Rong Mao * 1 , Tao Du 2 , Shutao Wei 3 , Zhiqian Bai 4 , Zhijie Zhao 5
1 Xi’an XD High Voltage Apparatus Co., Ltd.
2 Xi’an XD High Voltage Apparatus Co., Ltd.
3 Xi’an XD High Voltage Apparatus Co., Ltd.
4 Xi’an XD High Voltage Apparatus Co., Ltd.
5 Xi’an XD High Voltage Apparatus Co., Ltd.

* Author to whom correspondence should be addressed.

Advances in Engineering Innovation, Vol. 9, 6-10
Published 10 July 2024. © 10 July 2024 The Author(s). Published by EWA Publishing
This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Citation Rong Mao, Tao Du, Shutao Wei, Zhiqian Bai, Zhijie Zhao. Design and engineering application of 35kV floating photovoltaic power station. AEI (2024) Vol. 9: 6-10. DOI: 10.54254/2977-3903/9/2024080.

Abstract

Based on the concept of fishery-solar complementary systems, floating photovoltaic (PV) power stations have garnered significant attention in the power industry due to their minimal land use, high power generation efficiency, and improved water quality. However, irregular water level changes and surface disturbances caused by wind or human activities increase the difficulty of maintaining long-term stable operation. This paper, relying on a specific project, thoroughly analyzes and designs the technical scheme for a 35kV floating PV power station. It delves into the design of the floating island platform, anchoring system, shock absorption between the island and equipment, and the overall layout of the power station. These findings provide valuable references for the design, manufacturing, construction, and operation of other floating PV power stations.

Keywords

floating surface, floating island, anchoring, prefabrication, layout

References

1. Xin, S., Li, Z. P., et al. (2018). Application and benefit analysis of the "Fishery-Photovoltaic Complementary" project. Science and Technology Economy Guide.

2. Wang, F. Y. (2017). Technical characteristics and applications of floating photovoltaic power stations. Engineering Technology and Application.

3. Chen, D. P. (2017). New opportunities, new developments, and new challenges of floating photovoltaic power stations in China. Market Observation.

4. JTJ 215-1998. (1998). Port engineering load code [Standard].

5. GB 50330-2013. (2013). Technical specification for building slope engineering [Standard].

6. GB/T 20067-2006. (2006). Wire ropes -- Coarse diameter [Standard].

7. Bai, S. J., Wang, L., et al. (2017). Application of prefabricated substations in the power industry. Switchgear Industry Journal.

8. GB/T 30790-1998. (1998). Corrosion protection of steel structures by paint and clear coatings systems [Standard].

9. Li, W., & Li, J. (2016). Discussion on maintenance management mode of unmanned substations. Modern Industrial Economy and Informatization.

10. Li, X. D., & Ju, H. H. (2007). Review of mechanical properties of seismic isolation rubber bearings. Shanxi Construction.

11. Sun, J. (2017). Application technology and solutions of floating photovoltaic power stations. Energy Conservation and Environmental Protection.

12. Shang, C. Z. (2017). Analysis of design key points for floating photovoltaic power stations. Electric Power Survey and Design.

Data Availability

The datasets used and/or analyzed during the current study will be available from the authors upon reasonable request.

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License. Authors who publish this journal agree to the following terms:

1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.

2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.

3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See Open Access Instruction).

Volume Title
ISBN (Print)
ISBN (Online)
Published Date
10 July 2024
Series
Advances in Engineering Innovation
ISSN (Print)
2977-3903
ISSN (Online)
2977-3911
DOI
10.54254/2977-3903/9/2024080
Copyright
10 July 2024
Open Access
This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited

Copyright © 2023 EWA Publishing. Unless Otherwise Stated